1 3

KJams Rotary 2 Pedal

KJams Rotary 2 Pedal

$190.00
$190.00
Sale Sold out

Order Today Reserve yours now! In stock soon.

Ships today September 18. Order within

View full details

KJams Rotary 2 Pedal

Unlock a new realm of sonic possibilities with the Rotary 2 pedal, a dual-speed rotary simulator that combines cutting-edge technology with vintage charm. Engineered with the Spin FV-1 DSP chip and handcrafted in Holland, Michigan, this pedal offers two distinct programs: a classic rotary effect and an enhanced dual mode for a richer, chorus-like texture.

KJams Rotary 2 Pedal Review

With intuitive controls for Speed, Hi/Lo Mix, and real wood accents on the control panel, you'll effortlessly dial in your ideal tone. The built-in and external speed switch inputs, along with an expression pedal option, give you unparalleled flexibility in your performance. Elevate your sound with the Rotary 2 and experience the magic of rotary simulation like never before.

KJams Rotary 2 Pedal Controls

  • Single (down): Rotary with two Speed controls and Horn/Woofer mix control.
  • Dual (up): Rotary with two Speed controls, Horn/Woofer mix control, and a second Horn (makes it chorus-y)
  • Spd1/Spd2: Toggles the rotary speed between the settings on the two Speed controls. See below.
  • Bypass: A standard bypass/enable latching switch.
  • Speed: Controls set the maximum and minimum speeds.
    • Which Speed control is currently active is set by the Spd1/Spd2 switch.
    • If Speed 1 control is set lower than Speed 2, pressing the Spd1/Spd2 switch will cause the speed to gradually change from one speed setting to the other.
    • If Speed 1 is set higher than Speed 2, pressing the Spd1/Spd2 switch will cause the speed to immediately change from one speed setting to the other.
  • Hi/Lo Mix: The mix of the horn and woofer. It acts similar to a tone control.
  • Volume: Controls output level.
  • Spd1/Spd2 Jack: External input functions in parallel with and exactly like the Spd1/Spd2 footswitch.
  • Spd1 Jack: Expression jack that replaces the middle/lower control, Speed 1.
    • If the last tap on Spd1/Spd2 has set the pedal to Speed 1 control, the Expression pedal controls the speed.
    • If the last tap on Spd1/Spd2 has set the pedal to Speed 2 control, the Expression pedal does not control the Speed until Spd1/Spd2 is pushed again.

KJams Rotary 2 Pedal Specs

  • Input power is standard center-negative 9VDC.
  • The pedal draws 62mA.
  • The pedal is safe with higher voltages, up to 18VDC, but using higher voltages will not affect the sound, and we discourage using them.

More KJams Products

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)